150-C60NBD AB Solid State Intelligent Motor Controller 60A 3P Soft Starter

150-C60NBD AB Solid State Intelligent Motor Controller 60A 3P Soft Starter

Key Features
Soft Start/Stop: 6 programmable curves (for pumps, fans, conveyors, crushers, etc.) + torque control, eliminating water hammer and mechanical shock, extending the life of belts, gears, and bearings.
Energy-Efficient Operation: Built-in motor bypass relay, automatically switching after startup; controller power consumption < 6W, overall efficiency > 99%, helping projects easily meet ISO 50001 energy efficiency standards.
Integrated Protection: Electronic overload protection (Class 10/20/30 adjustable), phase loss, reverse phase, over/under voltage, locked rotor, ground fault, thyristor overheating, PTC/KTY dual-channel thermal input; supports IEC 60947-4-2 and NEMA ICS 2 standards.
Intelligent Diagnostics: Three-digit LED display + RJ45 port, real-time display of current, voltage, power, thermal capacity, thyristor health, and last trip cause; one-click PDF report generation via Studio 5000 or Connected Components Workbench.
Network Ready: Standard EtherNet/IP, built-in dual-port switch, supports DLR ring network; also retains 24V digital I/O and Modbus-RTU for easy integration with SCADA, MES, or cloud IoT platforms, enabling remote OTA firmware updates.

Typical Applications
Centrifugal pumps, compressors, fans, cooling towers, crushers, mixers, conveyors, refrigeration systems, HVAC AHU, water treatment aeration, tunnel ventilation, mine conveyor belts, port cranes, new energy battery mixing equipment.

Technical Highlights
60A Full Load Without Derating: Continuous operation at 50°C ambient temperature; built-in forced air cooling channel, direct press-fit of aluminum substrate and thyristor, thermal resistance < 0.05 K/W.
Compact Size: 70mm wide × 160mm high × 155mm deep, saving 70% space compared to traditional star-delta solutions, reducing cabinet depth to 300mm. Plug-and-play: The main circuit uses Cage Clamp technology, allowing for easy connection of 25 mm² cables with one hand; the control terminals are push-in type, eliminating the need for crimp terminals and reducing wiring time by 50%.  SIL3/PL e ready: Supports Safe Torque Off (STO) and Safe Stop 1 (SS1), meeting EN 62061 and ISO 13849-1 requirements, and can be directly integrated into a safety PLC system.

Selection and Expansion
The 150-C60NBD can be mounted on the same busbar with the 150-C60NBR bypass contactor, 193-ECM current monitoring module, 140MT thermal relay, and 20F frequency inverter, enabling an integrated "soft start + frequency conversion + safety" panel layout.  Through the Add-On Profile, it can be easily imported into TIA Portal, EPLAN, or SolidWorks Electrical, automatically generating terminal diagrams, BOMs, and 3D thermal simulation models, reducing design time by 80%.

Environmental Protection and Recycling
Compliant with RoHS 2.0, REACH, and WEEE directives throughout its lifecycle; the housing is made of recyclable thermoplastic polyester, and the thyristor module uses lead-free solder.  After decommissioning, it can be recycled free of charge by Rockwell Automation's global recycling center, and customers receive a carbon footprint offset certificate for ESG reporting.

Product details pictures

Related products