>
>
2026-09-02
The Siemens 6ES7407-0KA02-0AA0 is a PS407 10A power supply module designed for the SIMATIC S7-400 automation system. As an important power supply component for S7-400 PLC racks, the PS 407 10A provides the required DC power for the system backplane and connected automation modules.
For industrial automation projects, plant maintenance and S7-400 system replacement, finding the correct Siemens 6ES7407-0KA02-0AA0 power supply is important to minimize PLC downtime and maintain stable operation.
The 6ES7407-0KA02-0AA0 is a Siemens SIMATIC S7-400 PS407 10A power supply module.
According to Siemens documentation, the PS 407 10A is designed for a wide input-voltage range and supplies 5 V DC/10 A and 24 V DC/1 A on the secondary side. The module is intended for use with SIMATIC S7-400 systems and is suitable for industrial automation applications requiring a reliable rack power supply.
| Parameter | Specification |
|---|---|
| Manufacturer | Siemens |
| Product Family | SIMATIC S7-400 |
| Model | PS407 10A |
| Article Number | 6ES7407-0KA02-0AA0 |
| Module Type | S7-400 System Power Supply |
| Rated Input | 120/230 V AC/DC |
| Input Range | 85–264 V AC / 88–300 V DC |
| Output 1 | 5 V DC / 10 A |
| Output 2 | 24 V DC / 1 A |
| Frequency | 50/60 Hz |
| Application | SIMATIC S7-400 PLC systems |
The wide-range input capability allows the PS407 to operate with different industrial power supply conditions. Siemens documentation specifies an AC input range of 85–264 V and a DC input range of 88–300 V for the PS 407 10A.
A stable power supply is essential for the operation of an industrial PLC system. The S7-400 power supply provides the DC voltages required by the system components installed in the rack.
The 6ES7407-0KA02-0AA0 provides:
5 V DC with up to 10 A output current
24 V DC with up to 1 A output current
Wide-range AC/DC input
Power supply for the S7-400 backplane
Industrial-grade power management for automation systems
Siemens identifies the module as “SIMATIC S7-400, Power supply PS407: 10 A, wide range, UC 120/230V, 5 V DC/10 A.”
The Siemens PS407 10A power supply can be used in a wide range of industrial automation environments where SIMATIC S7-400 systems are installed.
Typical applications include:
S7-400 PLC systems are commonly used for centralized industrial control. The PS407 provides the rack power required by the PLC system and its modules.
Industrial process control systems can require reliable PLC power supplies for continuous operation. The PS407 10A is suitable for S7-400 installations used in large automation systems.
For existing S7-400 installations, replacing an aging or failed power supply with the correct Siemens part number can help reduce equipment downtime.
Maintenance departments and industrial automation distributors can keep 6ES7407-0KA02-0AA0 as a replacement spare for S7-400 PLC systems.
Before ordering a replacement S7-400 power supply, always check the complete Siemens article number.
For example:
6ES7407-0KA02-0AA0
should not automatically be treated as interchangeable with every PS407 or S7-400 power supply.
The PS407 family includes different versions and current ratings. Siemens documentation separately identifies the PS 407 10A and PS 407 10A R models, with the latter designed for redundant operation.
Therefore, when replacing an existing power supply, verify:
Siemens article number
Power supply model
Rated output current
Input voltage requirements
S7-400 rack configuration
Whether redundancy is required
Existing system documentation
This is especially important for older PLC installations where the original equipment documentation may be incomplete.
The 6ES7407-0KA02-0AA0 is the standard PS407 10A power supply.
Siemens also documents the PS 407 10A R, which is designed for redundant power supply configurations. The two products should not be treated as identical simply because both belong to the PS407 family.
When purchasing a replacement, use the complete Siemens part number rather than searching only for “S7-400 power supply” or “PS407 10A.”
If you are looking for a replacement power supply for an existing S7-400 PLC, the easiest method is to check the product label on the installed module.
Look for:
6ES7407-0KA02-0AA0
Then compare the following information:
Siemens manufacturer marking
Article number
PS407 model
Rated voltage
Output current
Physical condition
Packaging and product documentation
Siemens currently lists 6ES7407-0KA02-0AA0 as a SIMATIC S7-400 PS407 power supply with a 10 A rating and wide-range 120/230 V specification.
For factories operating older S7-400 automation systems, keeping critical PLC spare parts available can reduce the risk of extended production downtime.
The Siemens 6ES7407-0KA02-0AA0 PS407 10A is particularly relevant when:
An existing S7-400 power supply has failed
A maintenance team needs a direct replacement
A production line requires an emergency spare
An automation system is undergoing refurbishment
An industrial distributor needs S7-400 spare parts
A plant is maintaining legacy Siemens PLC equipment
For international buyers, confirming the exact article number before purchasing is recommended.
Yes. Siemens identifies 6ES7407-0KA02-0AA0 as the SIMATIC S7-400 PS407 10A power supply module.
The PS407 10A provides 5 V DC/10 A and 24 V DC/1 A outputs according to Siemens S7-400 documentation.
The PS407 10A has a wide-range input. Siemens documentation specifies 85–264 V AC and 88–300 V DC permitted input ranges.
Yes. It is specifically designed as a power supply module for the SIMATIC S7-400 automation system.
CXY Trade PLC supplies Siemens PLC spare parts and lists the 6ES7407-0KA02-0AA0 Siemens PS407 10A power supply module for industrial automation customers.
For price, availability, shipping options and product verification, contact the CXY Trade PLC sales team.
The Siemens 6ES7407-0KA02-0AA0 PS407 10A is an S7-400 system power supply designed to provide stable DC power for SIMATIC S7-400 automation systems. Its wide-range input and 5 V DC/10 A and 24 V DC/1 A outputs make it an important component for S7-400 PLC installations.
When purchasing an S7-400 replacement power supply, always verify the complete Siemens article number 6ES7407-0KA02-0AA0 to ensure the correct product is selected.
CXY Trade PLC can provide the Siemens PS407 10A power supply for industrial automation maintenance, PLC replacement and spare-parts requirements.
Related search terms: Siemens 6ES7407-0KA02-0AA0, 6ES7407-0KA02-0AA0, Siemens PS407 10A, S7-400 power supply, Siemens S7-400 power supply, PS 407 10A, Siemens PLC power supply, SIMATIC S7-400 spare parts.
ติดต่อเราตลอดเวลา
