|
| Place of Origin: | Germany |
| Brand Name: | ABB |
| Certification: | COO & COC |
| Model Number: | SB822 |
TU830V1 3BSE013234R1 ABB Electronic rack AC 800M S800 I O Supports 8 I O modules
ABB SB822 is an 8-slot I/O electronic rack (base plate) specially designed for S800 I/O systems, supporting horizontal installation. It can accommodate up to 8 S800 I/O modules (such as DI801, DO810, AI810, AO810, etc.) and provide power distribution and high-speed data communication channels through the built-in ModuleBus bus. The SB822 is mainly used to integrate multiple I/O modules into a compact unit and connect to the AC 800M controller or System 800xA system via the CI801 or CI854A communication interface module.
Core features
| Model Number | TU830V1 |
| ABB Ordering Code | 3BSE013234R1 |
| Product Family | ABB S800 I/O System |
| Compatible With | AC 800M PLC (PM86x controllers) |
| Mounting | 35 mm DIN rail (EN 60715) |
| Field Wiring | Spring-clamp terminals, 0.14–2.5 mm² |
| Backplane Interface | ModuleBus (proprietary ABB bus for S800 I/O) |
| Isolation Voltage | 500 V AC RMS (field-to-system) |
| Power Supply | Supplied via backplane from I/O termination board |
| LED Indicators | Power OK, ModuleBus Comm, Fault |
| Hot Swap Support | Yes (with compatible I/O modules) |
| Operating Temperature | 0°C to +60°C |
| Certifications | CE, UL, CSA, IEC 61010, IEC 61326 |
Must be used with S800 I/O modules (e.g., AI810, AO810, DI810, DO810)
Requires I/O termination boards (e.g., TB820, TB840) and backplane cables
Part of the AC 800M hardware ecosystem—configured via Control Builder M engineering tool
Not compatible with older Advant Controller or AC 100/400 systems
The TU830V1 is widely deployed in:
⚡ Power plants (thermal, hydro, nuclear) for turbine and boiler control
