Xiamen Changxuyuan Trading Co., Ltd
Email: sales@cxytrade.com TEL: +86--15959497059
Home
Home
>
blog
>
Company blog about Emerson UNI3403 Unidrive SP 22 kW 400 V AC Drive for Industrial Motor Control
Events
Leave A Message

Emerson UNI3403 Unidrive SP 22 kW 400 V AC Drive for Industrial Motor Control

2026-11-20

latest company blog about Emerson UNI3403 Unidrive SP 22 kW 400 V AC Drive for Industrial Motor Control

Emerson UNI3403 Unidrive AC Drive: Technical Specifications and Replacement Guide

The Emerson UNI3403 is an industrial AC drive from the Control Techniques Unidrive family. Rated at 22 kW / 30 HP, it is designed for 400 V-class, three-phase motor-control applications requiring regulated speed, torque, or acceleration.

In addition to its role as a variable-speed drive, the UNI3403 remains relevant as a legacy automation spare. Maintenance teams often require the exact model to restore an existing machine while limiting wiring changes, control-panel modifications, parameter conversion, and commissioning work.

UNI3403 at a glance
  • Manufacturer: Emerson / Control Techniques
  • Product family: Unidrive
  • Rated power: 22 kW / 30 HP
  • Voltage class: 400 V
  • Input supply: 380–480 VAC, three phase
  • Published continuous output current: approximately 46 A at 3 kHz under specified conditions
  • Enclosure: IP20

Product Overview

The UNI3403 is a Size 3 AC drive intended for industrial motor speed and torque control. Technical documentation identifies it as the 22 kW model in the UNI3400 range, with a maximum permissible continuous output current of approximately 46 A at a 3 kHz switching frequency under the stated operating conditions.

The UNI3400 family includes several visually similar models with different power and current ratings. The UNI3403 sits between the 18.5 kW UNI3402 and the 30 kW UNI3404. Consequently, external appearance alone is not sufficient for replacement identification.

Emerson UNI3403 Unidrive SP 22 kW 400 V AC Drive for Industrial Motor Control

UNI3403 Technical Specifications

Specification UNI3403 Details
Brand Emerson / Control Techniques
Product Family Unidrive
Model UNI3403
Product Type Industrial AC drive / variable frequency drive
Rated Power 22 kW
Horsepower Rating 30 HP
Voltage Class 400 V class
Input Voltage 380–480 VAC
Input Phase Three phase
Continuous Output Current Approximately 46 A at 3 kHz under specified operating conditions
Drive Size Size 3
Enclosure Rating IP20
Primary Function Industrial motor speed and torque control
Current-rating note: The 46 A figure applies under the operating conditions stated in the relevant Unidrive documentation. A higher switching frequency, elevated ambient temperature, installation method, and application duty may require current derating. Always verify the applicable technical manual before sizing or commissioning the drive.

Key Technical Characteristics

22 kW / 30 HP Motor-Control Capacity

The UNI3403 provides a nominal power rating of 22 kW / 30 HP. This rating is a primary identification point because neighboring UNI3400 models are assigned different motor-power and output-current values.

Drive selection should not be based on power alone. The connected motor’s nameplate current, overload requirement, load profile, acceleration demand, and operating environment must also be considered.

400 V-Class Three-Phase Supply

The drive is intended for industrial three-phase supplies in the 380–480 VAC range. Before installation, confirm that the site supply and the connected motor are compatible with the drive’s voltage class.

Multiple Motor-Control Approaches

The Unidrive platform supports several motor-control approaches, including open-loop and closed-loop operation, V/Hz control, and servo-oriented applications, depending on configuration and installed options.

The required control mode should be identified before replacing an existing unit. Applications using encoder feedback, specialized option cards, or communications modules may require more than a basic model match.

Support for Legacy Machinery

Many UNI3403 units remain in service as part of established production lines and OEM systems. When a drive fails, an exact-model replacement may allow the existing electrical and control architecture to be retained, subject to configuration and condition checks.

Typical Industrial Applications

The Emerson / Control Techniques UNI3403 can be used in machinery that requires controlled motor speed, torque, direction, or acceleration. Typical application categories include:

  • Conveyor systems
  • Hoisting and lifting equipment
  • Packaging machinery
  • Material-handling systems
  • Pumps and industrial fans
  • Machine tools
  • Production machinery
  • Textile machinery
  • Process equipment
  • OEM automation systems
  • General industrial motor-control installations

The UNI3403 is not automatically suitable for every 22 kW motor. Final suitability depends on the motor nameplate, load characteristics, overload profile, duty cycle, control mode, feedback arrangement, braking requirements, and installation environment.

Emerson UNI3403 Unidrive SP 22 kW 400 V AC Drive for Industrial Motor Control

UNI3403 as a Replacement or Spare Drive

When an installed UNI3403 fails, maintenance teams may prefer to source an exact UNI3403 replacement rather than redesign the system around a current-generation drive. Retaining the same model can potentially reduce the scope of:

  • Control-panel modifications
  • Power and control wiring changes
  • PLC program changes
  • Mechanical mounting changes
  • Parameter conversion and reconfiguration
  • Commissioning and validation work
  • Production downtime

However, matching the model number does not by itself guarantee a direct installation. The replacement unit’s options, control configuration, parameter set, feedback hardware, terminals, and overall condition should also be checked.

How to Identify the Correct UNI3403 Replacement

Recommended identification information
  1. Complete model number from the original nameplate
  2. Clear photograph of the drive nameplate
  3. Photograph of the front panel and terminals
  4. Motor power and rated current
  5. Site input voltage
  6. Application and load type
  7. Control mode and feedback arrangement
  8. Installed option or communication cards
  9. Required unit condition and quantity

1. Confirm the Complete Model Number

The original drive should be identified as UNI3403. Do not select a replacement solely from enclosure size, front-panel layout, or photographs, because other Unidrive models may look similar.

2. Verify Motor Power and Current

Confirm the motor’s nameplate power and rated current. Although the UNI3403 carries a nominal rating of 22 kW / 30 HP, actual drive suitability depends on both the motor current and the application’s load demands.

3. Check the Supply Voltage

Verify that the existing installation uses an appropriate three-phase, 400 V-class supply within the drive’s specified input range.

4. Review Output-Current Requirements

The documented continuous output-current figure is approximately 46 A at 3 kHz under specified conditions. Confirm the selected switching frequency, ambient temperature, overload requirement, and any applicable derating before installation.

5. Identify Feedback and Option Hardware

Determine whether the existing system uses encoder feedback, communication modules, control option cards, or other application-specific hardware. These items can affect compatibility even when the base drive model is correct.

6. Preserve the Existing Parameter Set

If the original drive remains accessible, record or back up its parameters before removal where possible. Parameters may include motor data, acceleration and deceleration times, speed limits, input/output assignments, control mode, and feedback settings.

Parameter transfer and commissioning should be performed by appropriately qualified personnel. A replacement drive should not be energized until its wiring, motor data, options, and operating parameters have been verified.

UNI3403 Compared with Other UNI3400 Models

The following comparison helps distinguish the UNI3403 from neighboring models in the same family.

Model Power Rating Published Output Current*
UNI3401 15 kW 34 A
UNI3402 18.5 kW 40 A
UNI3403 22 kW 46 A
UNI3404 30 kW 44–60 A, depending on conditions
UNI3405 37 kW 70 A

*Current ratings depend on the applicable operating conditions, switching frequency, and derating criteria. Consult the relevant Unidrive technical documentation for the exact rating applicable to the installation.

Models in the UNI3400 family should not be treated as direct substitutes based only on their shared product-series designation. Power rating, current capacity, installed options, physical configuration, and application requirements must all be reviewed.

Precision Speed and Torque Control

The UNI3403 is suited to applications requiring controlled speed, torque, and dynamic motor performance. Depending on its configuration, the Unidrive platform can support open-loop, closed-loop, and servo-oriented control.

For a replacement application, the original control method should be confirmed before ordering. A system that relies on feedback devices or closed-loop operation may require compatible feedback hardware, option modules, and parameter settings.

Installation and Commissioning Considerations

Before installing a replacement UNI3403, review the following technical factors:

  • Electrical supply: Confirm voltage, phase, protection, grounding, and isolation arrangements.
  • Motor data: Verify rated voltage, current, frequency, speed, and power from the motor nameplate.
  • Load profile: Consider starting torque, overload demand, acceleration time, braking, and duty cycle.
  • Cooling: Maintain the required airflow and installation clearances.
  • Environment: Check ambient temperature, contamination, moisture, vibration, and enclosure requirements.
  • Switching frequency: Apply current derating where required.
  • Control wiring: Verify terminal functions and signal types before energizing the drive.
  • Options and feedback: Confirm that required cards, modules, and sensors are present and compatible.
Safety: AC drives contain hazardous voltages and can retain electrical charge after power is disconnected. Installation, inspection, and commissioning should be performed by qualified personnel in accordance with the applicable technical documentation and site safety procedures.

Information to Provide When Purchasing

Providing complete identification and application information helps reduce the risk of ordering an incompatible replacement. Buyers should supply:

  1. The complete UNI3403 model designation
  2. A clear image of the original nameplate
  3. Motor power and rated current
  4. Input supply voltage
  5. Application type and operating duty
  6. Control mode, if known
  7. Encoder or feedback details
  8. Option-card and communication-module information
  9. Required quantity
  10. Required product condition, where applicable

For legacy equipment, photographs of the nameplate, front panel, terminal area, and installed option modules are particularly useful for confirming the required configuration. The dedicated Emerson UNI3403 Unidrive AC Drive product page on CXY Trade PLC can be used to review the exact model and purchasing information.

Frequently Asked Questions

What is the Emerson UNI3403?

The UNI3403 is a Control Techniques Unidrive industrial AC drive rated at 22 kW / 30 HP for 400 V-class, three-phase motor-control applications.

What is the output current of the UNI3403?

Published Unidrive documentation identifies a maximum permissible continuous output current of approximately 46 A at 3 kHz under the specified operating conditions. Derating may apply at other switching frequencies or environmental conditions.

What input voltage does the UNI3403 use?

The UNI3403 is a 400 V-class, three-phase drive with an identified input range of approximately 380–480 VAC.

Can a UNI3403 directly replace an existing Unidrive?

An exact UNI3403 may be suitable when the voltage, motor current, control mode, feedback system, installed options, parameter configuration, and operating conditions match. The complete configuration should be verified before installation.

Are UNI3403 and UNI3405 interchangeable?

No direct interchangeability should be assumed. The UNI3403 is rated at 22 kW / 30 HP, while the UNI3405 is rated at 37 kW / 50 HP. Their current capacity and application requirements differ, even though both belong to the UNI3400 family.

Why is the switching frequency important?

Switching frequency can affect drive heating and permissible continuous output current. Operating at a higher switching frequency may require current derating according to the relevant Unidrive documentation.

What should be checked before powering a replacement drive?

Check the supply voltage, motor data, power and control wiring, grounding, feedback devices, installed options, parameter settings, cooling arrangements, and applicable safety procedures before energizing the unit.

Conclusion

The Emerson UNI3403 / Control Techniques UNI3403 is a 22 kW, 30 HP, 400 V-class three-phase AC drive designed for industrial variable-speed motor control. Its published continuous output-current rating is approximately 46 A at 3 kHz under specified operating conditions.

For legacy automation systems, sourcing the exact UNI3403 can help limit the engineering work associated with replacing an established drive. Nevertheless, the model number must be evaluated alongside the motor rating, supply voltage, control mode, feedback hardware, option modules, parameter set, and installation environment.

Accurate nameplate identification and complete application details are the most reliable basis for selecting a UNI3403 replacement or spare drive.

CONTACT US AT ANY TIME

+86--15959497059
Room 202-5, Building 21, Wanghai Road, Software Park 2, Huli District, Xiamen, Fujian China 361008
Send your inquiry directly to us