>
>
2026-11-18
The Emerson UNI4401 is part of the Control Techniques Unidrive Classic family of industrial AC drives. The UNI4401 is a Size 4, 45 kW drive designed for 400 V-class three-phase industrial motor control applications. Its documented nominal rating is 45 kW / 75 HP with a continuous output current of up to 96 A under specified operating conditions.
For maintenance engineers working with legacy Unidrive systems, an UNI4401 board can be an important spare part when a drive experiences a control, power, interface or electronic-board failure. Instead of replacing an entire drive, locating the correct UNI4401 replacement board may help maintenance teams restore an existing system while keeping the original drive configuration.
The UNI4401 belongs to the Unidrive Classic Size 4 family. Technical documentation identifies UNI4401 as a 45 kW, 75 HP model for 400 V-class applications, while market references also identify it as a three-phase 380–480 VAC AC drive.
When searching for an Emerson UNI4401 board, buyers should verify the identification label, board number, revision and physical configuration before ordering. Large-frame legacy drives can contain multiple electronic assemblies, and a board intended for another Unidrive model may not be compatible.
For this reason, the safest approach is to match the replacement board with the original equipment and provide photographs or detailed identification information when requesting a quotation.
![]()
Although this article focuses on the board-level spare-part requirement, understanding the original drive helps identify the correct replacement component.
| Specification | UNI4401 |
|---|---|
| Brand / Manufacturer | Emerson / Control Techniques |
| Product Family | Unidrive Classic |
| Model | UNI4401 |
| Drive Size | Size 4 |
| Nominal Power | 45 kW |
| Nominal Horsepower | 75 HP |
| Voltage Class | 400 V |
| Input Voltage Range | 380–480 VAC ±10% |
| Phase | Three Phase |
| Continuous Output Current | Up to 96 A at specified conditions |
| Typical Input Current | 76 A |
| Product Type | Industrial AC Drive |
| Typical Use | Variable-speed motor control |
The published Unidrive documentation lists UNI4401 at 45 kW / 75 HP with 96 A maximum permissible continuous output current at 40°C for the specified switching-frequency condition.
Legacy industrial equipment can remain in service for many years. When an electronic board fails, replacing the complete drive may not always be the most practical maintenance solution.
A suitable UNI4401 replacement board can be considered when:
The original drive enclosure is still in good condition
The motor and power section remain functional
The failure is isolated to an electronic board
The machine configuration depends on the existing Unidrive
A complete replacement would require additional commissioning
Downtime must be minimized
The customer needs a specific legacy spare part
For older production equipment, maintaining the original drive platform can also reduce the need for mechanical modifications, control-system changes and extensive parameter reconfiguration.
Industrial maintenance buyers may use different terms when searching for the same type of spare part. For this reason, a dedicated website article should naturally cover several related search phrases.
Common searches include:
Emerson UNI4401 board
UNI4401 control board
UNI4401 PCB
UNI4401 replacement board
UNI4401 spare board
Control Techniques UNI4401 board
Unidrive UNI4401 PCB
UNI4401 drive board
UNI4401 electronic board
UNI4401 replacement
Unidrive Classic replacement board
Emerson Unidrive spare parts
These phrases reflect different stages of the purchasing process, from identifying a failed component to looking for a complete replacement.
![]()
Before purchasing an UNI4401 board, maintenance personnel should compare the original component carefully.
Confirm that the original system uses UNI4401 rather than another model from the same Unidrive family.
The Unidrive family includes several different power ratings. For example, UNI3405 is rated at 37 kW, while UNI4401 is rated at 45 kW and UNI4402 at 55 kW.
Look for:
Board part number
PCB identification
Revision number
Serial or manufacturing information
Connector arrangement
Component markings
If possible, provide photographs of both sides of the original board when requesting a replacement.
The connector layout should be compared with the original board before installation. Even when two boards appear similar, connector arrangements or revisions can differ.
Check whether the original drive is being used for:
Conveyor systems
Extrusion equipment
Pumps
Fans
Hoists
Mixers
Machine tools
Industrial production machinery
Heavy-duty motor control
The application can help determine whether the original drive configuration and control requirements need to be preserved.
The Unidrive Classic platform is now considered a legacy product family, and current industrial parts suppliers list UNI4401 as discontinued.
This makes UNI4401 spare parts and replacement boards particularly relevant for factories that continue operating older machinery.
Replacing a failed board can be attractive when the surrounding automation system is still operational and the customer wants to avoid a complete drive modernization project.
For maintenance departments, the priority is often not to install the newest technology but to obtain the correct component quickly and restore production.
Before placing an order, compare the following information:
Drive model: UNI4401
Product family: Unidrive Classic
Drive size: Size 4
Power rating: 45 kW / 75 HP
Voltage class: 400 V
Input: 380–480 VAC three phase
Output current: Up to 96 A under specified conditions
Board identification: Match the original board
Revision: Verify before replacement
Connector layout: Compare with the original
The exact board identification is especially important because the UNI4401 is a large industrial drive and should not be treated as a generic VFD component.
When purchasing an Emerson UNI4401 board, buyers should provide as much identification information as possible.
Useful information includes:
Complete drive model
Board part number
Board revision
Nameplate photograph
Clear photographs of the PCB
Connector photographs
Existing fault symptoms
Required quantity
This information helps suppliers determine whether the available component is suitable for the customer's existing drive.
If you are looking for an Emerson UNI4401 spare part or replacement, you can also check the dedicated UNI4401 product page on CXY Trade PLC:
Emerson UNI4401 Unidrive AC Drive 45 kW 400 V 3-Phase VFD
The UNI4401 is a Control Techniques Unidrive Classic Size 4 industrial AC drive with a nominal rating of 45 kW / 75 HP for 400 V-class three-phase applications.
UNI4401 has a nominal power rating of 45 kW / 75 HP.
UNI4401 belongs to the 400 V drive range. Published specifications identify the input voltage range as approximately 380–480 VAC ±10%, three phase.
The published specifications list up to 96 A continuous output current at 40°C under the specified operating condition.
UNI4401 is a legacy Unidrive model and is listed by industrial automation suppliers as discontinued. This makes the availability of original, surplus, refurbished and spare components particularly relevant for existing installations.
Check the complete drive model, PCB part number, revision, connector layout and physical appearance. Providing clear photographs of the original board is recommended when confirming a replacement.
The Emerson UNI4401 / Control Techniques UNI4401 is a 45 kW, 75 HP, 400 V-class Unidrive Classic AC drive used in industrial motor-control applications. Because this is a legacy platform, maintenance teams may search specifically for UNI4401 boards, PCBs, control boards and replacement spare parts when repairing existing equipment.
For CXY Trade PLC, creating dedicated content around UNI4401 board, UNI4401 replacement board, Emerson UNI4401 spare parts and Control Techniques UNI4401 provides a natural way to connect informational searches with the corresponding product page.
Use the product URL three times in the article with different anchor text:
Emerson UNI4401
UNI4401 replacement and spare part
Control Techniques UNI4401 AC drive
যে কোন সময় আমাদের সাথে যোগাযোগ করুন