6ES7131-4EB00-0AB0 Siemens SIMATIC DP ET200S 2DI 120VAC 5 Units Per Packing Unit

6ES7131-4EB00-0AB0 Siemens SIMATIC DP ET200S 2DI 120VAC 5 Units Per Packing Unit

1.Overview of the 6ES7131-4EB00-0AB0 Siemens

Siemens SIMATIC ET 200S Digital Input Module – 6ES7131-4EB00-0AB0. This module is a key component of the Siemens SIMATIC ET 200S distributed I/O system. It is a two-point digital input module with a rated voltage of 120V AC.
With an ultra-narrow 30 mm width, it provides two 24 VDC high-speed source/sink inputs for plug-and-play operation with a refresh cycle of ≤ 0.1 ms, further accelerating the cycle time of ET 200S distributed I/O.

With its stable and reliable performance, compact design, and easy maintenance, the Siemens 6ES7131-4EB00-0AB0 electronic module is an ideal choice for building efficient and reliable industrial automation systems.

2.Core Features:

Model: 6ES7131-4EB00-0AB0
Number of Inputs: 2 DI
Rated Input Voltage: 24 V DC (20.4…28.8 V)
Input Characteristics: IEC 61131-2 Type 3, Source/Sink Switchable
Input Current: Typical 4 mA
1 Signal Voltage: 15…30 V
0 Signal Voltage: -30…+5 V
Input Delay: 0.05 ms (Hardware), Software Selectable: 0.1/0.5/3/15/20/32 ms
Cable Length (Shielded/Unshielded): Maximum 1000 m/600 m
Power Consumption: Typical 30 mA (from 5 V backplane)
Power Loss: Typical 0.3 W
Diagnostics: Channel Status LED, Short Circuit, Wire Break, Overload
Isolation: 500 V AC from backplane bus
Operating Temperature: -25°C…+60°C ℃ (horizontally mounted)
Storage/Transport Temperature: -40℃…+70℃
Ingress Protection: IP20
Dimensions (W × H × D): 8.90 x 8.30 x 6.50 cm
Weight ≈ 0.172 g

Two 24 VDC digital inputs, source/sink switchable (accepts both PNP and NPN sensors).
Hardware input filtering: 0.05 ms; software filtering: 0.1/0.5/3/15/20/32 ms selectable. Supports pulse capture up to 10 kHz.
Channel-level LED status indication and wire break/short-circuit diagnostics, with diagnostic messages uploaded via Profinet.
Hot-swappable during operation for maintenance without downtime.
An ultra-narrow 30 mm width ensures plug-and-play compatibility with all ET 200S interface modules (IM151-1/3/7/8).

High-voltage signal processing: This module is designed for direct connection to 120 V AC industrial field signals, eliminating the need for additional signal converters and capable of processing higher control voltages.

Standards compatibility: Its input characteristics conform to IEC 61131 Type 1, ensuring broad compatibility and reliability with other automation equipment.

Diagnostic Function: The module provides group fault (SF) diagnostics. When a fault is detected, an LED indicator quickly issues an alarm, helping maintenance personnel quickly locate the problem.

Hot-swappable Support: As an electronic module of the ET 200S series, it supports hot-swappable module replacement while the system is running, significantly improving system availability and ease of maintenance.

3.Product details pictures

4. Related products