Phoenix Contact FL MGUARD RS4000 TX/TX VPN Order No. 2200515 2 Ports Router

Phoenix Contact FL MGUARD RS4000 TX/TX VPN Order No. 2200515 2 Ports Router

Phoenix Contact FL MGUARD RS4000 TX/TX VPN 2200515 – A One-Stop Solution for Industrial-Grade Secure Routing and VPN Gateway

The FL MGUARD RS4000 TX/TX VPN, part number 2200515, is a high-end DIN rail secure router from Phoenix Contact's mGuard series, designed for 24/7 continuous operation in operational (OT) environments. It combines Gigabit twisted pair performance, hardware-accelerated VPN tunneling, a deep packet inspection firewall, and remote maintenance capabilities in a 45 mm wide metal housing. This allows engineers to securely connect PLCs, HMIs, IPCs, or I/O networks to the cloud, headquarters, or mobile maintenance terminals without the need for additional software.

Key Highlights
• Dual Gigabit Ethernet Ports: Two RJ45 10/100/1000 Mbps ports, configurable in switching, routing, or DMZ mode, delivering wire-speed forwarding. • Hardware VPN: Built-in dedicated encryption chip, supports 250 IPSec/OpenVPN tunnels out of the box, with AES-256 performance up to 100 Mbps, and allows for zero-disruption remote firmware push and batch configuration.
• Deep Firewall: A DPI-based Layer 2–7 policy engine identifies over 50 industrial protocols (Modbus/TCP, PROFINET, EtherNet/IP, OPC UA, etc.), enabling one-click whitelisting.
• Redundant Power Supply: 9.6–48 V DC wide-range input with a dual-terminal design supports seamless UPS switching; a power failure alarm relay triggers a SCADA event.
• Industrial-grade Protection: -40°C to +70°C operating temperature, IP30 metal housing, 5 g vibration resistance, 30 g shock resistance, IEC 61850-3/IEEE 1613 power certification, and ATEX Zone 2 explosion-proof certification. • Zero-touch deployment: After registering with the mGuard Device Manager cloud, on-site configurations can be automatically pulled by simply scanning a QR code, with an average onboarding time of less than 2 minutes.
• Long lifecycle: Firmware and threat databases are continuously updated until 2035, support TPM 2.0 secure boot, and meet IEC 62443-4-2 SL2 requirements.

Typical Application Scenarios
Remote pumping station: Securely connect the on-site S7-1500 to the headquarters WinCC OA system via a 2200515 VPN tunnel, reducing travel costs by 90%.
Wind farm SCADA: Leverage a Gigabit ring network and firewall whitelisting to prevent malicious firmware flashing and ensure safe grid connection of wind turbines.
Semiconductor production line: Deploy multiple RS4000s within a cleanroom to form a DMZ, isolating the AMHS logistics system from the factory backbone network, complying with SEMI E95 standards.

Ordering and Delivery
Model: FL MGUARD RS4000 TX/TX VPN
Order Number: 2200515

Product Images

Related Products