|
| Place of Origin: | United States |
| Brand Name: | Bently Nevada |
| Certification: | COC & COO |
| Model Number: | 3500/23E-00-00 |
Bently Nevada 3500/23E-00-00 Transient Data Interface 3500 ENCORE Monitoring System
Product Overview
The Bently Nevada 3500/23E is an Ethernet System Interface Module (SIM) for GE Bently Nevada's flagship 3500 Series platform. It provides a 100 Mbit/s Ethernet gateway for critical monitoring data such as vibration, temperature, displacement, and speed, seamlessly connecting the 3500 rack to System 1 asset management software, third-party PLCs (Allen-Bradley, Siemens, Schneider), and DCSs (Honeywell, Emerson, and Yokogawa). The "E" suffix on the model designates enhanced firmware and support for IEEE 1588 Precision Time Protocol (PTP), ensuring cross-system event timestamp accuracy of <1 ms, meeting API 670 and IEC 61508 SIL2/SIL3 requirements.
Key Advantages
• 100 Mbit/s full-duplex Ethernet: TCP/UDP, Modbus TCP, OPC UA, EtherNet/IP, Modbus RTU (serial port)
• Dual redundant network: Independent MAC/IP addresses for ports A and B, supporting PRP/HSR network redundancy and zero-packet-loss switchover
• PTP time synchronization: IEEE 1588-2008, combined with GPS/IRIG-B for plant-wide clock synchronization within <1 ms
• Plug-and-Play: Automatically identifies the status of all monitoring modules, relays, and power supplies in the 3500 rack, eliminating the need for manual I/O mapping
• In-depth diagnostics: Real-time reporting of rack temperature, power supply voltage, fuse status, and communication link health; event logs with 1 ms timestamps
• Hot-swappable: Online firmware replacement or upgrade with zero downtime; supports SNMP traps and SMTP email alerts
• Network security: TLS 1.3 encryption, 802.1X authentication, whitelist firewall, HTTPS web Management Interface
• Wide operating temperature: –40°C to +70°C, suitable for Arctic LNG, Middle Eastern deserts, and offshore platforms
Technical Specifications
Form Factor: Single-slot 3500 rack module, 6U x 160 mm
Power Supply: 24 V DC (redundant) from the 3500 rack backplane
Power Consumption: Typical 4.5 W, Maximum 6 W
Interfaces:
• 2 x RJ45 10/100 M (A/B network)
• 1 x RS-232/RS-485 serial port (Modbus RTU)
• 1 x IRIG-B time code input (BNC)
• 1 x USB 2.0 (maintenance/firmware update)
Protocols: Modbus TCP/RTU, OPC UA, EtherNet/IP, SNMP, SMTP, SNTP, PTP
LED Indicators: PWR, NET-A, NET-B, IRIG-B, TX/RX, DIAG
Certifications: CE, UL, ATEX Zone 2, IECEx, SIL2/SIL3 (Exida)
Typical Applications
• Integrating the 3500 rack in a refinery hydrocracking unit with Honeywell DCS for vibration interlocking and predictive maintenance
• Uploading 3500 data from an offshore FPSO gas turbine to ABB 800xA via Modbus TCP
• Synchronizing the 3500 system on a nuclear power plant's main feedwater pumps with the plant-wide clock via PTP to meet nuclear-grade sequence of events recording requirements
• Directly transmitting OPC UA data from a large air separation unit's centrifugal compressor to the System 1 cloud diagnostic center
Product Images
Related Products
| 3500/15-02-02-00 Power Supply Module | 3500/20-01-01-00 Rack Interface Module |
| 3500/22-01-01-00 TDI Transient Data Interface | 3500/25-01-01-00 Key Phase Module |
| 3500/32-01-00 Four-Channel Relay Module | 3500/33-01-00 16-Channel Relay Module |
| 3500/40-01-00 Shaft Displacement Monitor | 3500/42-01-00 Vibration Acceleration Monitor |
| 3500/45-01-00 Position Monitor | 3500/50-01-00 Speed Monitor |
| 3500/53-01-00 Overspeed Protection Module | 3500/60-01-00 Temperature Monitor |
| 3500/61-01-00 Temperature I/O Module | 3500/62-01-00 Process Variable Monitor |
| 3500/64M Dynamic Pressure Monitor | 3500/70M Reciprocating Compressor Monitor |
| 3500/72M Piston Rod Position Monitor | 3500/77M Cylinder Pressure Monitor |
| 3500/90-01-00 Communications Gateway Module | 3500/92-01-00 Communications Gateway Module with Modbus/TCP |
